… and the left rear quarter panel. (And door skin, sort of)

4 April 2009

So today the driver side quarter was finished, cut to size and shape, and tacked into position.

 

First was to cut away some more of the old quarter. I cut an inch below the top edge and about two inches from the door. A centimetre above the lower contour line. And at the back end there’s about an inch of wrap around. I also painted (with POR-15) some bare metal that will be hidden when the quarter is on.

Then the replacement is put on the car and aligned. From the inside of the car trace on the quarter panel where the existing quarter has been cut away.

Cut a centimetre larger than this outline all round (the initial alignment is critical, so take care and most importantly ensure the middle contour line properly follows the original). Then offer it back up to the car and clamp in place. Outline onto the car.

On this new outline use a flange tool to recess the existing metal, allowing the new replacement to sit flush. Only flange the existing metal along the top. The door edge and rear edge of the existing metal will not be able to be flanged as various bits of metal are in the way to prevent this. Instead, flange the replacement skin on these edges. This means, that the door and rear edges of the replacement tuck under, and the top sits on top of the existing metal, so everything is flush. For the lower contour line of the replacement cut on the line and flange a centimetre above this.

 

Now it’s time to weld…

 

Also I completely removed the original door skin and mocked up the replacement… things are starting to look quite exciting…

Advertisements

One Response to “… and the left rear quarter panel. (And door skin, sort of)”

  1. danny Says:

    MAN CAR SURE IS TURNIN OUT NICE!! I just put a new Edelbrock carb on my camaro. Its runnin like a top. Took one of my pals from work for a ride in it and did some burnouts and some crazy passes in it .Brother in law gave the carb to me for fixin the fuel problem and brakes on his 75 Venutra. It is startin to get warm out. I love summer. Anyway car looks great!


Leave a Reply to danny Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: