Removing intake and exhaust manifolds.

16 July 2008

The engine in it’s very own, new, home:

 

1 – the intake manifold.  2 – all the manifold bolts removed, I didn’t follow a sequence for undoing them just dotted about loosening each one gradually.  3 – hard to see but there was a bolt that is screwed into the manifold with a nut holding it to the timing chain cover. This would not play nice, so I had to chop it in two.

 

1 – the intake manifold.  2 – the engine minus the intake manifold.

 

The exhaust manifold unbolted. In the left picture you can see the two sheared bolts I have in the exhaust flange plate.

 

1 – The fan drive spinny thing to be removed. And the alternator bracket about to be taken off.   2 – The parts removed.

 

The engine stripped semi bare.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: